Description
Model Number:Zoway-CX120
1. Compliance:CE Certified
2. Warranty:2 Year limited warranty with lifetime support
3. Delivery Time:In Stock
Email: imani@batterypackassembly.com
Tel:+86 13174506016
WhatsApp:+86 13174506016
WeChat:18659217588
Email: imani@batterypackassembly.com
Introduction
It is mainly used in the laboratory to disassemble button batteries for picking up and research. Different molds can also be used for battery sealing, electrode pressing, battery pressing and other operations.
Configuration
Standard configuration can be used for CR20XX series button batteries. You can also replace part of the mold parts and package CR24XX series button batteries.
Main features
*Built-in safety overflow oil valve, the pressure can be adjusted according to the needs, and the upper limit of the pressure can be set to prevent the damage caused by the excessive pressure caused by the misoperation, which ensures the safety of the machine.
*Built-in pressure gauge, can observe and accurately control the size of the sealing pressure.
*Using hydraulic drive, the pressure can reach 8T.
*Specially designed hydraulic structure, labor-saving operation.
*Precision mold design ensures accurate and reliable sealing forming, solid steel structure design, stable and safe use.
*Small size, easy to operate, can be placed in a glove box for operation.
*Beautiful appearance, easy maintenance, small size, convenient operation, accurate molding, etc.
Instructions
1. Battery placement: When the mold is opened, put the battery into the positioning groove of the lower mold, with the negative side facing up, put it straight and smooth, hold the oil unloading valve handwheel, tighten it in a clockwise direction, and rotate it to the limit Location is fine.
2. Battery disassembly: continuously pry the hand lever up and down, the jack rises and pressurizes the mold to close the mold. When you hear a "Pa", the disassembly is completed, and the pressure gauge of the disassembly pressure reads about 80-100kg/cm2.
3. Take out the battery: Hold the oil unloading valve handwheel and unscrew half a turn counterclockwise, and the sealing mold will automatically open. After the mold is opened, take out the battery. (The handwheel is equipped with limit points in both the forward and reverse directions, which can avoid excessive rotation and cause the steel ball seal ring of the oil unloading valve to fall out and oil leakage)
Specifications
Model number | ZOWAY-CX120 |
Hand rocker | The operating force of the hand rocker is less than 6kg |
Pressure gauge | The pressure gauge of the normal button battery removal pressure is about 80~100kg/cm2. The machine has been set at about 80~100kg/cm2 before leaving the factory. In special circumstances, more pressure is required (the maximum pressure is about 200kg/cm2). 8 tons of pressure) can only be adjusted after consulting the manufacturer. |
Mold materials | Mold materials imported from Japan are used. |
Structural material | High-strength chromium steel and alloy aluminum, the surface will never rust after environmentally friendly electroplating and spraying. |
Dimensions | 232mm*190mm*330mm |
Weight | 30kg |
Product Images
Hot Tags: coin cell disassembling machine, suppliers, customized, wholesale, for sale, Cylindrical Cell Assembly Machine, Laboratory Machine, 5V12A 8 Channel Battery Testing Equipment, Temperature And Humidity Test Chamber, Pouch Cell Lab Fabrication Machine, Coin Cell Sealing Machine
2018-04-11 17:26:11
2018-04-11 17:26:11
+86-592-3926659
C329l1, Block BC, 1021 Houhai Avenue, Yuyi Community, Shekou Street, Nanshan District, Shenzhen