Vacuum Drying Oven for Battery Electrode

Description

Model Number:Zoway-JK-ZKHX-A2
1. Compliance:CE Certified
2. Warranty:2 Year limited warranty with lifetime support
3. Delivery Time:In Stock

Email: imani@batterypackassembly.com
Tel:+86 13174506016
WhatsApp:+86 13174506016
WeChat:18659217588

Content

Email: imani@batterypackassembly.com

Introduction:

Vacuum Drying Oven is suitable for the vacuum baking process of battery electrode piece and battery cell to be injected in the production process of lithium battery. It adopts the industry-leading uniform temperature technology, the temperature fluctuation is ± 2 ℃; the vacuum cavity can be kept at - 0.098 MPa for more than 12 hours; multiple quality and safety protection are the ideal equipment to ensure the drying effect.

 

Features:

A. Electrical features:

1. AISET three position PID temperature controller is selected for temperature control with high resolution.

2. The temperature measuring probe is specially made by Taiwan Valin, which is placed at the back of vacuum chamber to quickly and truly reflect the working temperature.

3. Triple over temperature protection device can cut off heating automatically when the temperature exceeds the set value to ensure the safety of materials and equipment.

4. Equipped with timing shutdown function, timing starts after constant temperature, automatically stops when baking time ends, and each layer can be timed independently.

5. The fan of each layer can be opened independently and can be used as cooling fan when heating is stopped.

6. Using high quality sus stainless steel seamless electric heating tube, heating up quickly, energy saving and durable.

 

B. Structural features:

1. The vacuum chamber is heated by hot air around the chamber, and the design of circulating air duct is innovated to ensure high-precision uniform temperature in the chamber.

2. The inner chamber is made of T3.0 mm high quality sus stainless steel, which is resistant to corrosion of battery slurry and electrolyte.

3. The multi-layer heat insulation material forms a closed insulation layer, which can block the heat loss and effectively solve the problems of adjacent warehouse temperature and external wall heating.

4. The door is double-layer toughened glass structure with over-voltage protection function. When the air pressure in the chamber is too high, it can automatically deflate, so that the air pressure in the chamber can be restored to the allowable range.

5. The vacuum chamber is equipped with a silicone sealing ring between the chamber and the door, and the chamber can be kept at - 0.098 MPa for more than 12 hours.


Specifications

Item

Specification

Touch Screen

7.0 Inch Xinjie color touch screen

PLC

Programmable controller

Thermostat

Shanghai Yatai brand PID temperature controller

vacuum meter

 Panasonic digital vacuum meter

Operation interface

Color touch screen + PID temperature controller + digital vacuum meter; automatic air change, constant temperature and cooling can be realized

Working chamber size

H600mm×W600mm×H750mm×2 layers

Optional Size:H650mm×W650mm×H750mm×2 layers

 

Whole machine size

H1800mm×W1200mm×H1100mm 

Optional Size:H1900mm×W1250mm×H1100mm 

 

Power

Single layer:6KW(peak power)×2

Power supply

three-phase,380V /480V

Supporting gas source

vacuum:-0.095~-0.1Mpa

compressed air:0.4~0.5Mpa

Dry gas:0.1~0.2Mpa

Working temperature

Room temperature~150℃

Temp Accuracy

±1℃

Heating rate

It takes about 35 minutes for room temperature (25 ℃) to rise to 80 ℃

Heating mode

Electric heating, each layer of oven increases independent internal heat circulation, each layer is independent

Over temperature protection device

Each layer is equipped with double machinery overtemperature protection and independent temperature measurement

Alarm mode

Alarm lamp + buzzer on

Vacuum degree of working room

0~-0.098Mpa,After holding pressure for 12 hours, the vacuum degree shall be kept at least 96%

Pressure change rate

The vacuum breaking time of the working room is less than 1 minute

Working chamber material

SUS 304 stainless steel

Machine material

SECC steel plate with plastic coating on the surface


Product Images

Vacuum Dry Oven.JPG


Battery Electrode Drying Oven.png


Hot Tags: vacuum drying oven for battery electrode, suppliers, customized, wholesale, for sale, Electrolyte For Batteries, Lithium Battery Aging Cabinet, Precision Energy Storage Spot Welder, Double Side Energy Storage Spot Welder, Pouch Cell Assembly Machine, Cylindrical Battery Fixed Clamp Fixture

Product Recommended