Single-Column Hydraulic Press Machine for C-Type Landings

Description

Model Number:Zoway-BSW07-10T
1. Compliance:CE Certified
2. Warranty:2 Year limited warranty with lifetime support
3. Delivery Time:In Stock

Email: imani@batterypackassembly.com
Tel:+86 13174506016
WhatsApp:+86 13174506016
WeChat:18659217588

Content

Email: imani@batterypackassembly.com

Introduction

The single-column hydraulic machine body is a C-type floor-standing structure, open on three sides, easy to operate, and tempered after welding to ensure that the frame will never deform. It is mainly used for press fitting, assembly, shallow drawing of metal products, and forming pressing. , embossing, is a general-purpose equipment for motors, shafts, auto parts, electronic hardware products, internal combustion engines, textile machinery, washing machines, electrical appliances and other factories.

Product parameters

Model		BSW07 -10T	BSW07 -20T	BSW07 -30T	BSW07 -40T	BSW07 -50T	BSW07 -60T
Nominal pressure（T）		10	20	30	40	50	60
Maximum working pressure of liquid（Mpa）		21	21	21	21	21	21
Surface height (E) mm		850	850	850	850	850	850
Maximum opening distance（H）mm		400	400	500	550	550	600
Deep throat (s) mm		200	200	225	225	250	250
Maximum stroke(mm)		300	300	300	300	300	400
Work bench size	Left and right (L) mm	500	500	550	550	650	650
Work bench size	Before and after (W) mm	400	400	450	450	500	500
Speed	Rated load speed (mm/s)	165	165	165	165	155	155
	Working speed(mm/s)	24	24	24	18	15	15
	Return speed(mm/s)	140	140	140	125	125	125
Main frame size(mm)		700x950x2050	700x950x2060	760x950x2100	780x950x2150	800x950x2150	830x1000x2350
Power（Kw）		2.2Kw	3.7 Kw	3.7Kw	3.7 Kw	5.5 Kw	5.5 Kw

Features

1. Floor-standing hydraulic press has the characteristics of good rigidity, stability and high speed because it is a welding mechanism as a whole.

2. This series of hydraulic presses uses 2-20MPA liquid pressure as the power source, and external three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply.

3. This series of equipment uses liquid as the medium to transfer energy. It adopts advanced sub-cylinder hydraulic circuit, the oil temperature is low, the idle speed is above 150MM/sec, and the working speed is below 30 MM/sec.

4. The equipment is on standby, and the noise does not exceed 75 decibels when moving up and down.

5. It can be divided into manual and semi-automatic control modes. Manually, the press-fit upper mold can be stopped in any stroke range. It can be equipped with an emergency rebound button or an infrared hand guard device.

6. The press-fit stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold.

7. The height of the press-fit spindle can be adjusted by the timer or the position sensor within any stroke range.

8. Pressure, stroke, holding time, closing height can be adjusted by the customer for easy operation; with automatic counting function, can also be equipped with force measuring display, intelligent temperature controller, can be customized according to customer requirements.

9. The hydraulic mechanical output range of this series is available in various specifications of 15tf-100 tf. (1tf=1000kgf=9.8KN).

Dimension