1. When starting up, it is necessary to first check whether the various action actuators of the battery sleeve standard sorting integrated machine equipment are in the initial position, confirm that there is no other debris on the equipment, and then turn on the air source, confirm that the air pressure is 0.5 ~ 0.6Mpa, and then turn on the power to run the control program:

2. Turn off the power supply and air source when the equipment is disused after work:

3. Turn off the power and air supply during equipment repair, maintenance and maintenance:

4. When the battery to be sorted is loaded into the feeding box, the positive and negative directions of all the batteries should be consistent as far as possible. When the battery in the receiving box is about to be filled, the battery should be taken away in time:

5. When the machine is running, do not put your hands in the battery sorting track to avoid hurting your fingers:

6. When the battery sleeve marking and sorting integrated machine equipment operation abnormal or stop without reason, should first press the emergency stop button, and then check the abnormal situation of the equipment, after troubleshooting, to loosen the emergency stop button, so that the manipulator back to the origin, the system is in a suspended state, and then press the START green button, so that the system can resume automatic operation, If the system does not work, you can press the system reset button to restore the normal working state.